Project_Prolonged_V1

这是我的第一个设计尝试，即几乎从头开始的全3D打印10秤RC型号（使用“ Cranky Face V3 Gearbox先生”和“带有个性化编辑”的“ Ossum Face V3 Gearbox”和“ Ossum Face Napinial”基本模型）作为17岁的爱好者。 This version is a rear wheel drive model and is fully capable over moderate outdoor terrain.Fasteners and non-3d printed parts used:- 10scale RC 48mm rim tires- 8x12x3.5mm bearings x10 (For Swivels and Diff)- 10x15x4mm bearings x8 (For Diff and Gearbox)- 12x18x4mm bearings x2 (For Diff)- M3 screw assortment kit- 25kg 10比例RC Servo-98mm减震器X4-爱好QuickRun 1060- 3ch发射器和接收器-35T 550超越爱好DC DC Motor-3S Li-Po电池